0item(s)

You have no items in your shopping cart.

Product was successfully added to your shopping cart.

Miyabi 5000MCD 67 Maple

Miyabi 5000MCD 67 Maple

MIYABI 5000MCD 67 Santoku, 18cm blade. This Japanese santoku has an extremely hard MicroCarbide powder steel core for excellent cutting edge retention and sharpness. Santoku is the best-selling Japanese blade shape and the name translates as "Three Virtues", these being meat, fish and vegetables. The flat cutting edge lends itself to a chopping motion rather than the rocking cutting movement of European chef's knives. The blade core is surrounded by 132 outer layers of steel which make up the unique Damascus-design pattern on the blade. The cutting edge is Honbazuke-honed and symmetrical (not single bevel), so can be used by those both right and left-handed. There is no finger guard so the whole length of the cutting edge can be used. The black Ash wood handle sits comfortably in the hand, allowing firm control and tireless working. As with anything this special, care should be taken. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided.

  • Extremely hard MicroCarbide powder steel blade core
  • 132 layers of steel surrounding the core create the Damascus-design (133 Layers in total)
  • CRYODUR ice-hardened for extreme hardness
  • Rockwell hardness of approximately 66
  • Symmetrical cutting edge
  • Ashwood handle
  • Steel end-cap and handle mosaic pin
  • Made by MIYABI in Japan
(Show More)
Set Ascending Direction

   

4 Item(s)

  1. Miyabi 5000MCD 67 Sujihiki 240mm

    The Japanese Sujihiki knife is a true all-rounder and an added attraction to your kitchen. This long 24 cm sharp knife is produced in a masterful way with excellent materials, so it effortlessly cuts all kinds of food. Its appearance, typical of traditional Japanese knives, stands out for its attractive design. Its blade is inspired by the shape of the famous Japanese swords: the katanas. The Sujihiki knife has a CRYODOR® blade, with a core made of high grade MC66 powder steel surrounded by 132 layers of damask steel. The special manufacturing process of the blade provides a unique and very attractive damask design. The cold hardening (at -196º C) ensures the hardness, stability and retention of the edge of the blade. Both sides of the blade of the Miyabi Sujihiki knife are polished, giving the knife the Japanese profile of its blade and a unique cutting edge thanks to Honbazuke sharpening. The black ash handle is of the highest quality and is made of wood with the traditional D shape of Japanese knives. Its size and shape produce an optimal balance, so that this knife is pleasant to the touch, regardless of the cutting work. The attractive design of the ash wood shows a unique pattern, just like the leaf. You can enjoy the preparation of delicious dishes thanks to this Japanese knife Suhihiki Miyabi 5000MCD 67 series of damask steel. Resistant to corrosion Blade made with 133 layers of steel and a Microcarbide core to achieve a hardness of 66 Rockwell Japanese authentic leaf profile The symmetric blade with Honbazuke edge ensures unparalleled sharpness Traditional D-shaped handle made of black ash wood.
  2. Miyabi 5000MCD 67 Bread 240mm

    Cut bread, rolls and cakes easily and safely with this long Miyabi bread knife. The knife undergoes a special process during manufacture, which makes the blade flexible. The quality of the materials used in the manufacture ensures a long life of this knife. With its 24 cm length, the serrated blade of the Miyabi bread knife features a high grade MC66 steel core, encapsulated in a total of 132 layers of damask steel. This ensures stability and, at the same time, gives the blade an extraordinary appearance, since the multiple layers produce a distinctive floral pattern, unique to each knife. The blade hardens in a special process, reaching a hardness of about 66 rockwell. The handle of the knife is made of high quality wood with a nice black ash colour, which gives it a beautiful contrast with the blade. Its D shape provides ample control when cutting and avoids fatigue under prolonged use. You can cut large volumes of bread effortlessly and accurately with this 24 cm long kitchen knife from the Miyabi 5000MCD 67 series. Resistant to corrosion Blade made with 133 layers of steel and a Microcarbide core to achieve a hardness of up to 66 Rockwell The blade has the serrated edge, which simplifies the cutting of bread Traditional D-shaped handle made of black ash wood. Beautiful damask pattern
  3. Miyabi 5000MCD 67 Gyuto 200mm

    MIYABI 5000MCD 67 Gyutoh, 20cm blade. This Japanese gyutoh, or chef's knife, has a MicroCarbide powder steel core which gives extremely good sharpness and cutting edge retention. It has 132 outer layers of steel which surround the core and make up the unique Damascus-design pattern on the blade. The cutting edge is Honbazuke-honed and symmetrical (not single bevel), so can be used by those both right and left-handed. There is no finger guard so the whole length of the cutting edge can be used. The black Ash wood handle sits comfortably in the hand, allowing firm control and tireless working. As with anything this special, care should be taken. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided. Extremely hard MicroCarbide powder steel blade core 132 layers of steel surrounding the core create the Damascus-design CRYODUR ice-hardened for extreme hardness Rockwell hardness of approximately 66 Symmetrical cutting edge Wooden handle Steel end-cap and handle mosaic pin Made by MIYABI in Japan
  4. Miyabi 5000MCD 67 Santoku 180mm

    MIYABI 5000MCD 67 Santoku, 18cm blade. This Japanese santoku has an extremely hard MicroCarbide powder steel core for excellent cutting edge retention and sharpness. Santoku is the best-selling Japanese blade shape and the name translates as "Three Virtues", these being meat, fish and vegetables. The flat cutting edge lends itself to a chopping motion rather than the rocking cutting movement of European chef's knives. The blade core is surrounded by 132 outer layers of steel which make up the unique Damascus-design pattern on the blade. The cutting edge is Honbazuke-honed and symmetrical (not single bevel), so can be used by those both right and left-handed. There is no finger guard so the whole length of the cutting edge can be used. The black Ash wood handle sits comfortably in the hand, allowing firm control and tireless working. As with anything this special, care should be taken. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided. Extremely hard MicroCarbide powder steel blade core 132 layers of steel surrounding the core create the Damascus-design CRYODUR ice-hardened for extreme hardness Rockwell hardness of approximately 66 Symmetrical cutting edge Wooden handle Steel end-cap and handle mosaic pin Made by MIYABI in Japan
Set Ascending Direction

   

4 Item(s)